Quality Assurance Plan | Third Party Inspection | Industries We serve

Titanium Products

Our titanium products has all insoluble electrodes are manufactured with Titanium as basic component. Occasionally electrodes are also made from Niobium. In general electrodes are available in the form of plate, mesh, rod, wire, ribbon and customs built. Grades - Titanium (Grade I & II) Specifications International Specifications :- ASME SB-265 Round Bar/Wire :- ASME SB-348 ASTM F-67 AMS 4921 ,AMS 4928,AMS 4957, AMS 4958 , AMS 4965, AMS 4967 ,AMS 4971, AMS 4978, AMS 4979 Pipe :- ASME SB-337, ASME SB-338 Tube :- ASME SB-337, ASME SB-338 AMS 4942 AMS 5582, AMS 5583 Fittings :- ASME SB-363 Forgings :- ASME SB-381 MIL-T-9046, MIL-T-9047 Forgings :- ASME SB-381 MIL-T-9046, MIL-T-9047 Weld Wire :- ASME SB-337, ASME SB-338

Titanium Pipes

Titanium Seamless Pipe 1/8" NPS through 6" NPS (Sch 10S and Sch 40S) titanium welded pipe 3/4" NPS through 24" NPS (Sch 10S and Sch 40S) [May be Continuous Rolled & Welded to 8" Sch 40S or Brake Press formed and Welded from 6" NPS and above.]

Specifications

  • W.T 0.3~10mm
  • O.D 12~114mm
  • Length Max 15000mm
  • Seamless titanium tubing standard:ASTM B338/ASME SB338, ASTM B861/ASME SB861,ASTM B862/ASME SB862 ,AMS 4942, AMS 4944

Size Available: ½" NB to 24 "NB in SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS available in type SEAMLESS / ERW / WELDED/efsw
   

Titanium Tubes

Titanium seamless tube OD - 1/8" (3.18 mm) to 1-1/2" (38.1mm) Wall - .016" (4 mm) to .065" (1.65 mm) welded tube OD - 1/2" (12.7 mm) to 2" (50.8 mm) Wall - .028" (.71 mm) to .065" (1.65 mm)

Size Available: 6.35 mm OD up to 254 mm OD in 0.6 TO 20 mm thickness
TYPE :SEAMLESS / ERW / WELDED

Ttianium Sheets & Plates

Titanium Plate .1875" to 3" x up to 96" Wide x to 240" Long [Wider Widths, Custom and Special Shapes (Circles, Rectangles, Squares and Others) available on request.] Plate can be Sheared, Saw Cut or Water-Jet Cut to Standard sizes or any Custom size (dependent upon Customer preference and size considerations) Titanium Sheet .020" to under .187" x up to 48" Wide x Length Standard sizes: 48" Wide X 120" Long [Sheet can be sheared to any Custom size.] [By ASTM definition, Sheet is product .187" (4.75 mm) and under in thickness and 24" (610 mm) or more in width.]

Size Available:

0.1 mm thickness to 150 mm thickness. 1000 mm x 2000 mm
1220 mm x 2440 mm (4' x 8')
1220 mm x 4880 mm
1250 mm x 2500 mm
1500 mm x 3000 To 6300 mm
2000 mm x 2000 To 10000 mm and
As per requirement

Type: straight and in coil form


Titanium Rods

We are engaged in exporting, importing, and supplying Titanium Rods. The wide range of Titanium Rods provided by us possess high quality, great finish, rust-free nature, and long service life. We provide the Titanium Rods to the clients in various grades and different other specifications. The Titanium Rods which we bring forth are duly tested over various parameters to ensure their flawless nature. 

Known For

  • High quality
  • Great finish
  • Rust-free nature
  • Long service life
Size Available: 1 mm dia to 200 mm dia

Titanium Fittings

Elbow short radius butt-welding 90° 1" through 24" nps sch 1os and 40s elbow long radius butt-welding 45 1/2" through 48" NPS sch 10s and 40s elbow threaded 45° 1/4 " through 4" nps elbow threaded 90° 1/4 " through 4" NPS butt welding short branch straight tee 1/2" through 24" NPS (mss) sch 10s and 40s

Size Available:

½" NB to 24 "NB in SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS 

Such as 90° ELBOW ( LONG RADIUS / SHORT RADIUS ), EQUAL TEE, 45° ELBOW ( LONG RADIUS / SHORT RADIUS ), REDUCING TEE, ROUND CAP, CONCENTRIC REDUCER, ECCENTRIC REDUCER, STUB END (short/long), coupling (half/full)  -  Type: SEAMLESS / ERW / WELDED. 
  

Titaniuml Flanges

Blind flange 1/2" through 24" nps (ansi) & 12" through 60" (mss) class 150 through 2500 slip-on flange 1/2" through 24" nps (larger sizes available on request) weld neck flange 1/2" through 60" nps (ansi) [raised face only] class 150 through 2500 12" through 60" nps (mss) class 150 through class 900 [raised face] class 300 through class 900 [ring-type joints threaded flange 1/2" through 24" nps class 150 through 1500 (to 12" nps max. For class 2500) (larger sizes available on request) lap joint pipe flange 1/2" through 24" nps class 150 through 300 (larger sizes available on request)

Size Available:½" NB to 24 "NB in Weld neck, slip on , Socket Weld, Blind, lap joint, raised face , Flat face, threaded flanges, orifice flanges in class of 150, 300, 600, 900, 1500, 2500,

  

 


    Nickel Alloy
      Inconel
      Nickel
      Titanium
      Monel
      Hastelloy
     Cupro-Nickel
 
     Product Gallery
     We Export to


NICKEL LIVE CHART
[Most Recent Quotes from www.kitco.com]

 
All Rights Reserved. Copyright © Metal Tubes Industries
Website by www.mesotek.com